Cleaner, stripper, anti-graffiti, filler, primer, insulate, additive, consolidating, protector, water-repellent, oil-retardants, paint, Lasur, varnish, glaze, anti-mold, pesticide, dye, pigment, anti-corrosive, sealant, treatment, mortar, monolayer, coating, Sate, Restoration, Theming, Food Industry, Healthcare, Petrochemical, Tropical, Heritage, civil works, insulation, decoration, Acrylate, acrylic dispersion, silicate, silicone resin, silane, siloxane, nanotechnology, epoxy, polyurethane, elastomer, Facades, Theme Parks, Aquatic Parks, Hotels, Construction, Good transpiration, waterproof, biodegradable, VOC free, fungicide, algicide, insecticide, thyxotrophic, food, resistant, Condensation, mold, oxide, salt, moisture, dirt, graffiti, mold, micro-organism, spores, bacteria, corrosion
German manufacturer with factory located in Spain. It produces paints, systems and chemical treatments to protect buildings and industry. Protective systems, restoration and conservation in facades, buildings and Heritage. Paint systems and treatments for the food and agriculture industry, as well as the healthcare and pharmaceutical areas. Special anti-mold and insecticides paint systems. Protective systems, preservation and finishes for wood and its constructions. Protective systems for concrete, cement, gypsum and its constructions and pre-formed. Professional Theming systems for theme parks, aquatic parks, spa's, hotels, resorts, maintenance and protection in hotels surfaces and tourist facilities. Thermal Insulation Composite Systems in exterior facades ETICS-SATE. Cleaning and Anti-Graffiti protection systems. Paint systems for the physical-chemical corrosion coating and metal finishing.
Cleaners
In order to guarantee the success of any surface treatment, it is essential to take into account the surfaces cleaning and preparation, before proceeding to the subsequent application of any treatment or finish. We have a wide range of special cleaners, formulated in an aqueous base, biodegradable, without chlorine, formaldehydes, or phosphates, cleaners which are capable of effectively removing the greasy dirt, the pollution, the salt and lime crystals, the rust, the microorganisms, and in general any type of problem that can be suffered by the most common and specific surfaces of our industry and constructions, whether they are metal surfaces, surfaces of artificial or natural stone, mineral mortars, concrete and derivatives, prefabricated, ceramics, synthetic materials, wood, etc...
Stripping agents - macs®
FCS Business Group puts at your disposal the whole range of graffiti stripping agents of macs®, coming from our prestigious German partner Scheidel Innovative Chemie. We offer you the possibility to choose the most ideal stripping agent for each case, always being able to choose at your convenience and in terms of the requirements of the application, between a softer action, in depth, on great surfaces, or an option of maximum quickness in controlled surfaces. All macs stripping agents are formaldehydes, chlorine hydrocarbons and dichloromethane free. With this wide range, you will be able to strip most paints and coverings of 1 and 2 components available in the current market.
Antigraffiti system - macs®
FCS Business Group, puts at your disposal the whole range of graffiti removers and protective coatings of macs®, coming from our prestigious German partner Scheidel Innovative Chemie. Undoubtedly, macs® represents the range of graffiti removers and Antigraffiti protectors which are the most effective in the current market. We offer you the possibility to choose the most ideal graffiti remover agent for each case and surface. All macs® stripping agents are formaldehydes, chlorine hydrocarbons and dichloromethane free. We also offer you the possibility to choose the most ideal graffiti-protection, semi-permanent or permanent, which cover all kind of requirements on mineral surfaces and sensitive surfaces.
Fillers, primers, insulators, sealants
For the correct application of a surface treatment, it is essential to take into account the previous preparation. After cleaning the surfaces, we usually discover chips, stains, an irregular absorption, a deficient adherence, consistence, or waterproofing, etc... With our primers, fillers, insulators and complementary products, you will be able to solve usual and specific daily problems in applications.
Multipurpose Additives and protecting Treatments
For the correct application of a surface treatment, it is essential to take into account the previous preparation. After cleaning the surfaces, we usually discover chips, stains, an irregular absorption, a deficient adherence, consistence, or waterproofing, etc... With our multipurpose additives and protecting treatments and complementary products, you will be able to solve usual and specific daily problems in applications.
Mortars
En esta familia encontrará masillas multiuso, así como todos los morteros de la familia el·lite; morteros para restauración de fachadas y Patrimonio, para la tematizacción profesional, decoración, pavimentos.
Restoring and Theming System - TEMATEL·LITE
With the Professional Restoring and Theming System TEMATEL·LITE you can restore, create and reproduce with the maximum reality all types of stones, bricks, rocks, flagstones, marbles, ceramics, even wood metals and synthetic surfaces. They can be reproduced with a great variety of colors and finishes, flat, rough, rustic, with glazes, horizontally, vertically, indoors and outdoors, in immersion in water, even salt water, in swimming pools, etc... providing decorative and functional surfaces and surpassing the realism of the original ones. All of these, combined with the best technical qualities and advantages of a system which is capable of solving with solvency any technical requirements, without harming aesthetics and realism. Thanks to its high technical features, durability and its easy maintenance, it is especially indicated for professional restoring and theming in façades, monuments, buildings, thematic parks, aquatic parks, tourist and hotel hotel installations, urban developments, luxury residences, facades, rehabilitation and patrimony, etc...
Water-repellents and oil-retardants
For FAKOLITH, the water-repellence and the high transpiration of mineral bases has a vital importance for their correct preservation. That is why we have a wide range of polyvalent water-repellent and oil-repellent products of recognized prestige, for the in situ application in facades, pavements and surfaces of buildings, and also special ones for industrial use. Combining high quality raw materials, and our constant R&D studies, with water-based formulations or low content of COV's formulations, we are capable of offering, since many years ago, multipurpose concentrated products, already based on micro and nanotechnology.
Floors, pavements and baseboards
En esta familia encontrará algunos de los tratamientos y acabados más comunes recomendados en suelos y pavimentos de la industria y sector privado. En caso de que no encuentre el producto idóneo no dude en consultar a nuestro departamento técnico, ya que tan sólo le mostramos una selección de las posibilidades existentes dentro de los FCS Bussiness Group.
Protective Paints on Buildings and Façades
FAKOLITH has developed a basic range of special paints and coverings, which comply with the maximum necessary requirements, in the rehabilitation of facades and buildings, and in the protection of new surfaces. A wide range of special paints and coverings for their application in indoors walls and ceilings, in facades, for the waterproofing of roofs, and the protection of pavements. Additionally to this group, we offer more specific paints and coverings with the rest of specialties, for wood, steel and Industry.
ETICS-SATE for Facades - PROTECTel·lite
FCS has developed a new external and thermal insulation composite system for façades protection (ETICS/SATE), with thick layer mortar. Complete protection against the environmental elements in all types of climates, thermal insulation and energy saving for buildings. With its great variety of profiles, thermal insulators, anchorages, special mortars, water repellents, paints, coverings and finishes, and with an accurate and developed application system, the composite system PROTECTel·lite combines the German experience and technology with the Mediterranean requirements and versatility, and it is thought to be adapted to very reasonable costs, to facades of traditional work, rehabilitation and to the industrialized ones.
Wood Protection - PIGROL
FCS Business Group puts at your disposal a careful selection of the widest range of protections and finishes for wood and its constructions, from the catalogue of our prestigious German partner PIGROL. For the good preservation of wood, it is essential to know and regulate its degree of internal humidity and requirements of future use. With our a high protection primers and oils, open pore lasures, natural waxes, lacquers and varnishes, we offer you a wide range of solutions for the preservation and protection of wood indoors and outdoors, and on special climates.
Protective anti-corrosive coatings- TEMASPEED TIKKURILA
FCS Business Group puts at your disposal a depurated selection of the catalogue TEMASPEED, from our prestigious partner TIKKURILA Coatings. A catalogue which is made up of special high features paint systems, against physical and chemical corrosion and abrasion, indoors, outdoors, in immersion or at high temperatures and adverse environmental conditions. A wide range for professionals, industries and constructions with the most demanding quality and technical requirements, comprising protection systems for metal manufacturing industry and its constructions, machinery in general, pavements, in the energetic, petrochemical, mining, eolic, nautical, pharmaceutical, agricultural and livestock, food, paper and smelting industries, industrial vehicles... A quick service available in any color, also metalized ones, and with several gloss degree options and finish type options. The range includes technologies with a low content of COV's, and also their alternative technologies in aqueous formulations. Special products based on modified resins, in an acrylic base, alkyd, polyurethane, epoxy, chlorinated rubber, silicones, polyamides, amines, esters, zinc phosphates, aluminum, high quality pigments, etc...
Anti-mould and insecticide paints
As the first specialists of the sector in Europe and with more than 45 years of experience, FAKOLITH has the widest range existing in the market of anti-mould paints and insecticide paints in an aqueous dispersion. Solving in a sustainable, effective and durable way, the affections of fungi, bacteria, microorganisms, or insects, all them problems that we usually find in the buildings and industry facilities, has been since the foundation of FAKOLITH, one of the priorities of our founder, always in benefit of health. Especially in the food industry in the agricultural and livestock industry, in the health sector, in public installations, resorts, SPA's, gymnasiums and swimming pools, and also at our homes, a great variety, or toxic fungi infections, such as the Aspergillus, silently provoke in humans and animals, illnesses, allergies, and infections, that damage our health and life standard, and also cause a esthetical problem on the affected surfaces. Our paints and treatments are useful both for the renewal and maintenance of affected surfaces, and for the prevention of affections in risk areas. An oral toxicity test CE- Non-toxic Paints is available.
Multi-purpose tinting paste - MIXOL
FCS Business Group puts at your disposal the widest range of universal pigments, from our prestigious German partner MIXOL. Mixol can be used in most paints, coverings, fillers and mortars existing in the market. It can be easily homogenized and its concentration is very powerful. It is presented in a range of 33 base colors, plus 3 metal colors: gold, silver and copper. We have an especially mention to the oxide colors, which show the best U.V. resistance technically possible, and the best compatibility with special formulations.
Products on request
Mientras seguimos disfrutando de la era de la microtecnología, en FAKOLITH seguimos trabajando en las señales más evidentes de la nueva era, la Nanotecnología. La Nanotecnología comprende el desarrollo y la fabricación de elementos basados fundamentalmente en estructuras de tamaño inferior a cien nanómetros (nm.=0,0000001cm.). El grupo empresarial de FAKOLITH desde 2004 demuestra con su Departemento de I+D que la Nanotecnología ya es posible en nuestro sector, con novedosos productos, en constante evolución, que serán la base de nuestras gamas de productos en un futuro cada vez más próximo.
http://www.themingsystems.com.